The passage of time makes its mark on every roof!
Taking preventative measures and performing routine maintenance on your roof can help reduce the likelihood of experiencing significant issues while simultaneously extending its lifespan. Prevention is always preferable to treatment, and it is also more cost-effective.
This section of A Year in the Roof discusses roof maintenance as part of the broad principles that are provided below. In order to safeguard their roof for the long term, it underlines the components that roof repair contractors NYC should check for and the actions that their contractors should take during each season.
The Roof Inspection: What Criteria Should You Consider?
The first step in maintaining your roof is to perform routine inspections, and your contractor should perform these inspections on a regular basis to look for any issues.
Not only should they examine the roof every spring and autumn, but they should also perform a roof walk-through after every severe storm and if you have work done on the roof that involves significant activity and/or foot traffic (for example, when you install or maintain your HVAC system).
In addition to inspecting the roof for visible damage and penetrations, the contractor should pay particular attention to locations that are typically problematic, such as the following:
Drains: check to see that they are clear of any debris.
In particular, the seals and edges surrounding HVAC equipment, vents, and telecommunications equipment are included in this category of appliances.
Joints, seals, edges, and protrusions which are the regions with the largest potential for damage and leaks are referred to as edges.
Everywhere there is a change in elevation or grade, there is a junction or seal that has the potential to be a weak spot. This includes things like curbs and transitions.
Winter – Wait for Spring!
Even in the milder regions of the country, winter is not the best season to work on your roof! As a general rule, unless you have a problem or a leak, you should avoid working on your building’s roof during the cold, wet winter months.
However, if you have a leak or another problem that cannot wait until spring, there are some options. Empire Gen Construction USA Inc. roof coatings can be applied year-round and at temperatures as low as 0°F.
These coatings do not require mixing or priming and can be rainproof in as little as 30 minutes, allowing contractors to apply them during a brief period of dry weather. Liquid waterproofing can provide a lasting solution to minor leaks and penetrations until a more substantial recoat in the spring.
Spring: Inspections, Clearance, and Planning.
Spring is the time to evaluate the roof and arrange any major repairs or restoration work so you can take advantage of the warmer weather. It’s best to climb on the roof early and address any issues before the spring showers arrive.
Winter’s rainy and windy conditions may be hard on a roof. During the spring inspection, General Contractor NYC should ensure that drains are not clogged by dirt, fallen leaves, or small branches. On a similar point, they should inspect the screening mesh to ensure it is not clogged; it’s amazing what you can find in there, and a wayward sports ball can serve as an efficient stopper!
100% silicone roof coatings will protect and extend the life of your roof while also boosting energy efficiency and performance. Designed to renovate a wide range of substrates, this coating has demonstrated performance even in the roughest environments.
Recommended Article: Modern Roof Ideas
Leave a Reply