Edtiske extenders are used by the people to increase the coverage of their current network. Extender devices are used to eliminate dead zones & boost signals. There are several extender devices available in the market. Edtiske extenders are known for their performance. You can buy the Edtiske extenders very easily and create a reliable network without dead zones. Setting up Edtiske extenders is not a difficult task. You can perform the Edtiske extenders setup by yourself without being tech savvy. The requirement actually is having adequate information which you can gather from further sections. So, what are you waiting for? Let’s initiate the setup.

Table of Contents

Installation

Installation of hardware is the first step of the Edtiske extenders setup. To install the hardware you have to step ahead with the following:

Start with the unboxing of the device. Be careful while removing the packaging.
Thereafter you have to decide the placement of the extender.
While placing make sure the placement is close to the host router.
Stepping ahead you can power up the device. Powering requires an electric outlet.
Let the device bootup completes. Wait for the LED to get stabled.
Afterward you have to connect your laptop/ computer to the Edtiske extenders network.
You can establish this connection using ethernet wire or by accessing the wireless settings.
Make sure the connection is secure in case of wired connection.
On the contrary, if using a wireless method then make sure you are connected to the right network.
Connection must be with Edtiske extenders’ network using default details.

Moving further check out the Edtiske extenders setup process using web interface.

Setup

Setting up Edtiske extenders is simple to proceed with. Check out the steps you have to follow here:

Initiate the process with the launch of a web browser. You can use any browser but be sure the browser you are about to use is the updated version. Also remove cache & cookies to avoid hurdles in accessing the device.
In the URL bar of the browser you have to mention the default IP address.
Press enter and then the device web interface appears. You have to follow the screen to step further.
Connect the device with the host device using SSID & Password.
Stepping further you have to create a new network name for your extender network.
Also you have to configure the security settings, updating firmware and more.
Once done you have to submit the changes and reboot the device.
Furthermore, relocate the extension for performance optimization.
While relocating make sure a few things as listed here:
- There should not be a radio frequency device closer to the extender like microwave, cordless phone etc.
- No heavy metal object should be kept closer to the extender.
- Furthermore, the extender should be within the range of the host device so it can grab signals easily to amplify ahead.

Testing

Testing the new network created is important. While testing the network you need a smartphone and wireless network name with the password you created. Connect the device with the new network and browse websites, HD content, play online games etc to verify the network speed. This test is important to verify the new placement is perfect and whether the device is performing good or not.

Edtiske Extender Troubleshooting guide

Edtiske Extender is a perfect device yet some of the perfect devices encounter trouble occasionally. With the Edtiske Extender you might experience no internet, connection drop or such kind of issues. All troubles can be resolved by following quick and easy steps as specified here:

Verify firstly that all the cable connections are secure or not. Loose connections of wire lead to trouble.
Next check out that the wiring is not damaged. All the connected cables must not be damaged from anywhere. If it is so then you face problems in the network.
Next you have to check the internet connection from the host router device. In case there is an issue then connect ISP for the solution. On the contrary if there is no issue then step ahead in troubleshooting.
Go to the next step and reboot the device. Rebooting eliminates the temporary issues. Rebooting is very simple to perform. You just need to plugout the power. Wait for 5 to 10 minutes then again power up. This will resolve several troubles.
In case yet the issue is not resolved then check for firmware update. Firmware updates will fix bugs and resolve the issue you encounter with.
Lastly you can try factory resetting. Factory reset will erase all the changes you made in the configuration. Press the reset button to restore the factory settings.

Conclusion

From the crux of the above description it has been concluded that the Edtiske Extender Setup is a super easy process. Anyone can configure the extender who has information about the steps to follow. Above information in this article will help the users in performing setup on their own. Setting up an extender will eliminate all the connectivity issues you are facing. After the addition of Edtiske Extender into your existing networking system you will no longer face trouble with the network. In case you need help then you can connect the tech support hub team for resolving the issue.

Edtiske extender setup